danco
New Member
Posts: 4
|
Post by danco on Oct 23, 2010 21:04:30 GMT -5
Has anyone had any luck getting a driver for the ICDI USB port in Windows?
|
|
|
Post by senatorpenguin on Oct 24, 2010 16:24:20 GMT -5
Scroll down to the stellaris embedded USB drivers www.luminarymicro.com/products/software_updates.htmlUpdate: My bad, they come with the IAR Embedded Workbench for ARM. You can download the Kickstart edition for free (it has a 32kB code limit). They've conveniently located the drivers at the following path: C:\Program Files (x86)\IAR Systems\Embedded Workbench 5.4 Kickstart\arm\drivers\LuminaryFTDI The above link is if you want drivers to use your evalbot as a usb device, programmed to be a USB-serial converter.
|
|
|
Post by Chris Muncy on Oct 25, 2010 15:15:50 GMT -5
Hmm I have the Embedded workbench 6.0 not 5.4 and no drivers are there. I may have downloaded this for my MSP430.
Help ??
|
|
|
Post by senatorpenguin on Oct 25, 2010 18:13:57 GMT -5
|
|
|
Post by Hopelessness on Oct 27, 2010 11:19:20 GMT -5
I'm getting the following error when trying to install the driver from the IAR Embedded Workbench: Any clues? I'm on Windows 7 x64
|
|
|
Post by janusz on Feb 1, 2011 5:35:51 GMT -5
|
|
dids
New Member
Posts: 2
|
Post by dids on Feb 4, 2011 1:08:51 GMT -5
|
|
|
Post by shadowfax on Feb 17, 2011 13:15:29 GMT -5
I have used the StellarisWare.. but Windows XP and & are not able to detect the drivers even when I point them to it. Anyone got it worked by using StellarisWare?
|
|
|
Post by shadowfax on Feb 17, 2011 20:24:54 GMT -5
|
|
|
Post by ckanode on Feb 28, 2011 13:05:50 GMT -5
Thanks, shadowfax. That did it for me! I was struggling trying to get the drivers installed. The drivers included with the StellarisWare dev downloads, and with the CodeSourcery G++ Lite would "work". Woo hoo!
|
|