Post by tramsd99 on Apr 3, 2011 10:37:14 GMT -5
Has anyone used a UART to communicate with an EM2530 Zigbee module? I'm using UART1 on the EVALBOT but never get an interrupt.
I've tried it with flow control off and on. I've been able to use UART0 to receive bytes from a host PC over FTDI, just not UART1. I'm using uCOS.
I've tried it with flow control off and on. I've been able to use UART0 to receive bytes from a host PC over FTDI, just not UART1. I'm using uCOS.